| I. Gas Analyzer Pre-Filtration Consumables (for SIGMA/Rehm Oxygen Analyzer) |
|
|
|
|
|
|
| 1 |
29.9358 |
Analyzer Filter Tube (Activated Carbon) |
VXS/VXP/K/R/C/S Full Series |
Pre-purification of reflow soldering flue gas sampling, adsorb flux VOC, oil and gas, organic impurities, protect analyzer sensor |
Transparent acrylic tube, 6mm quick-connect fittings at both ends, built-in columnar activated carbon, max temperature ≤80℃ |
29.9358 China-made compatible replacement, ERSA same model filter tube, BTU universal filter tube |
| 2 |
29.9246 |
Precision Filter Element (White PTFE) |
VXS/VXP Series Oxygen Analyzer |
Filter rosin dust and particulate matter in flue gas, prevent blockage of analyzer gas path |
Threaded interface, filtration accuracy 0.2μm, PTFE material, resistant to organic solvent corrosion |
29.9246 China-made replacement, GF2600 small filter element, SIGMA original filter element |
| 3 |
29.9247 |
High-Flow Filter Element |
K Series High-Flow Flue Gas Analyzer |
Particulate filtration in high-concentration flue gas scenarios, extend sensor service life |
High-flow design, filtration accuracy 0.5μm, max temperature 120℃, stainless steel support mesh |
GF2800 high-flow filter element, 29.9247 compatible replacement, ERSA same model filter element |
| 4 |
29.9359 |
Desiccant Filter Tube (Silica Gel) |
Full Series Oxygen Analyzer |
Adsorb moisture in flue gas, avoid humidity interference with oxygen concentration detection accuracy |
Transparent tube, built-in color-changing silica gel desiccant, intuitive saturation observation, 6mm quick-connect fittings |
29.9359 China-made drying tube, molecular sieve drying filter element, universal gas drying tube |
| 5 |
29.9360 |
Molecular Sieve Filter Tube |
Vacuum Reflow Oven Oxygen Analyzer |
Deeply adsorb trace moisture and CO₂, adapt to high-precision oxygen detection in vacuum environment |
3A molecular sieve filler, low dew point adsorption, max negative pressure -0.1MPa, 6mm quick-connect fittings |
29.9360 compatible replacement, vacuum dedicated drying tube, SIGMA original part |
| 6 |
29.9361 |
Vacuum Oxygen Analyzer Filter Element |
R Series Vacuum Reflow Oven |
High-precision filtration for oxygen sampling in vacuum environment, intercept trace dust and oil stains |
Sintered metal mesh material, filtration accuracy 0.1μm, max negative pressure -0.1MPa, max temperature 200℃ |
29.9361 China-made vacuum filter element, vacuum dedicated analysis filter element |
| 7 |
29.9362 |
Cold Trap Filter Element |
Vacuum Reflow Oven Flux Recovery System |
Deep filtration of flux in low-temperature condensation environment, intercept gaseous rosin condensate |
Copper mesh + glass fiber composite material, min temperature -40℃, max temperature 200℃, compatible with original cold trap |
29.9362 China-made cold trap filter element, condensation filter screen, ERSA same model cold trap filter element |
| 8 |
29.9363 |
Flow Control Valve |
Analyzer Sampling System |
Adjust flue gas sampling flow, ensure stability of detection data, adapt to different working conditions |
Brass + PTFE material, flow adjustment range 0~10L/min, compatible with 6mm quick-connect fittings |
China-made same specification flow control valve, needle valve, pneumatic flow control valve |
| 9 |
RE-4207.0514 |
Filter Housing Assembly |
Full Series Analyzer Gas Path |
Fix the pre-filtration module, protect the internal filter element, support multi-filter combination |
6061 aluminum alloy material, anodized treatment, compatible with 6mm quick-connect fittings, modular design |
China-made same specification aluminum alloy filter housing, multi-channel filtration module |
| 10 |
RE-4215.0202 |
Filter Fitting Assembly |
Full Series Analyzer Sampling Pipeline |
Gas path pipeline transfer and sealing, adapt to different specifications of sampling tubes and filter elements |
PTFE + stainless steel material, resistant to organic solvent corrosion, quick-connect design, compatible with 4/6/8mm pipelines |
Same specification pneumatic quick-connect fitting, ferrule fitting, solvent-resistant adapter |
| 11 |
RE-4215.0203 |
Check Valve |
Analyzer Sampling Pipeline |
Prevent flue gas backflow, avoid contamination of sampling pipeline and analyzer, ensure one-way gas flow |
Stainless steel + PTFE material, opening pressure 0.05MPa, compatible with 6mm pipeline, temperature range -20~120℃ |
China-made same specification pneumatic check valve, non-return valve, solvent-resistant check valve |
| II. Flux Recovery System Filters/Cartridges |
|
|
|
|
|
|
| 12 |
25.6653 |
Square Folded Flux Filter |
VXS 925/935/945/955, VXP Series |
Filter rosin flux in reflow oven chamber, intercept liquid/solid rosin residue, protect condenser |
305×315×70mm, stainless steel mesh + glass fiber composite material, max temperature 280℃, filtration accuracy 10μm |
25.6653 China-made replacement, RE-1400.0038 knitted filter, BTU same model filter |
| 13 |
28.4161 |
Thickened Flux Filter |
K Series, R Series, C Series High-End Models |
Enhanced filtration in high-capacity and high-flux usage scenarios, extend cleaning cycle |
Thickened 50mm filter layer, double-layer stainless steel mesh support, max temperature 300℃, filtration accuracy 5μm |
28.4161 compatible replacement, custom thickened filter, ERSA same model filter |
| 14 |
RE-1400.0038 |
Knitted Flux Filter |
Full Series VXS/VXP/S Series |
Primary filtration of flux in large-scale circulating air in furnace chamber, intercept large particle rosin |
305×315×70mm, aramid knitted fabric material, max temperature 260℃, air permeability ≥800L/m²·s |
25.6653/28.4161 interchangeable, China-made aramid knitted filter cotton |
| 15 |
25.6654 |
Inlet Air Filter Panel |
Full Series VXS/VXP/K/R/C/S Models |
Primary filtration of reflow oven inlet air, intercept external dust and particulate matter, protect furnace chamber cleanliness |
Panel filter, size 595×595×21mm, G4 filtration grade, max temperature 180℃ |
25.6654 China-made replacement, same specification panel primary filter, HVAC inlet air filter |
| 16 |
25.6655 |
Circulation Air Filter |
Full Series Hot Air Circulation Models |
Secondary filtration of furnace chamber circulating air, intercept fine rosin particles and dust, ensure welding cleanliness |
Bag/panel filter, F8 filtration grade, max temperature 200℃, filtration accuracy 1μm |
25.6655 China-made medium efficiency filter, HEPA high efficiency filter, ERSA same model circulating filter |
| 17 |
28.4162 |
Vacuum Furnace Filter Element |
R Series Vacuum Reflow Oven |
Filter flue gas and flux in vacuum environment, adapt to negative pressure working conditions, prevent pump contamination |
Metal mesh + glass fiber composite material, max negative pressure -0.095MPa, max temperature 250℃, filtration accuracy 0.5μm |
28.4162 China-made vacuum filter element, vacuum pump inlet filter element, Busch vacuum pump filter element |
| 18 |
RE-1400.0039 |
Exhaust Air Filter |
Full Series Exhaust System |
Terminal filtration of furnace exhaust, intercept residual flux and dust, reduce environmental protection emissions |
Panel structure, M5 filtration grade, max temperature 180℃, size 495×495×15mm |
China-made exhaust filter, same specification primary filter cotton, environmental protection dedicated exhaust filter |
| 19 |
RE-1030642 |
Filter Fixing Bracket |
VXS 945/935/925 Models |
Install and fix the filter in the furnace chamber, prevent the filter from shifting and deforming, ensure the filter surface fits |
304 stainless steel material, bent and formed, compatible with original installation holes, surface polished |
China-made same specification fixing bracket, stainless steel filter bracket, custom bent parts |
| 20 |
RE-1030646 |
Filter Press Plate |
Full Series Flux Filtration Module |
Compress the filter, ensure the filter surface fits completely, prevent flue gas bypass |
304 stainless steel material, used with fixing bracket, anti-slip tooth design, compatible with original filter size |
China-made same specification press plate, buckle, stainless steel compression strip |
| 21 |
27.2007 |
High-Temperature Seal Strip |
Full Series Flux Recovery System |
Seal the filter module and condenser, prevent flue gas leakage, ensure stable system negative pressure |
Silicone + glass fiber material, temperature range -40℃~300℃, size 10×10mm, self-adhesive design |
27.2007 China-made replacement, same specification high-temperature seal strip, glass fiber silicone seal strip |
| 22 |
27.2008 |
Insulation Filter Cotton |
Furnace Chamber Insulation Layer Supporting |
Both insulation and primary filtration functions, intercept large particle foreign matter, protect heating module |
Aluminum silicate fiber material, max temperature 1200℃, thickness 20mm, density 128kg/m³ |
China-made aluminum silicate insulation cotton, ceramic fiber cotton, high temperature resistant insulation cotton |
| III. Heating System Consumables |
|
|
|
|
|
|
| 23 |
25.1234 |
Heating Element (Ceramic) |
VXS/VXP Series Furnace Heating Module |
Core heating component of furnace chamber, provide stable high-temperature heat source, adapt to reflow soldering temperature curve |
Ceramic packaging, power 2000W/3000W, voltage 380V, max temperature 400℃, service life ≥10000h |
China-made same specification ceramic heating tube, thick film heating element, ERSA same model heating core |
| 24 |
25.1235 |
Infrared Heating Lamp |
K Series, C Series Infrared Heating Models |
Infrared radiation heating, fast temperature rise, adapt to rapid temperature change requirements of lead-free reflow soldering |
Quartz glass tube, infrared coating, power 1500W, voltage 220V, wavelength 2~10μm |
China-made infrared heating lamp, quartz heating tube, halogen heating tube |
| 25 |
25.1236 |
Heating Tube (Stainless Steel) |
Full Series Hot Air Circulation Heating Module |
Hot air circulation system heating, cooperate with fan to realize uniform temperature control in furnace chamber |
304 stainless steel material, power 1000W/1500W, voltage 380V, max temperature 350℃ |
China-made stainless steel heating tube, finned heating tube, hot air circulation heating element |
| 26 |
RE-1020345 |
Temperature Controller |
Full Series Temperature Control System |
Accurate temperature control of furnace chamber, support multi-section temperature curve setting, PID self-tuning |
Omron/Delta original chip, temperature control accuracy ±1℃, support 485 communication, compatible with Rehm original program |
China-made same specification temperature controller, PID temperature controller, multi-channel temperature control module |
| 27 |
25.1237 |
Thermocouple (K-Type) |
Full Series Furnace Temperature Detection |
Real-time sampling of furnace chamber temperature, feedback to temperature controller, realize closed-loop temperature control |
K-type armored thermocouple, temperature range 0~400℃, accuracy ±0.5℃, compatible with original installation size |
China-made K-type thermocouple, armored thermocouple, temperature measuring wire, ERSA same model thermocouple |
| 28 |
25.1238 |
Overheat Protection Thermostat |
Full Series Heating System |
Overheat protection of furnace chamber, automatically cut off heating when exceeding set temperature, prevent equipment damage |
Mechanical thermostat, action temperature 350℃, automatic reset, compatible with original heating module |
China-made same specification overheat protector, temperature control switch, temperature fuse |
| IV. Conveyor System Consumables |
|
|
|
|
|
|
| 29 |
25.2345 |
Conveyor Chain |
VXS/VXP/K Series Mesh Belt Conveyor Models |
PCB board conveying in furnace, adapt to mesh belt transmission system, tensile resistance, high temperature resistance |
304 stainless steel material, pitch 12.7mm, custom width, max temperature 300℃, ultimate tensile strength ≥5000N |
China-made same specification conveyor chain, stainless steel chain, mesh belt chain, BTU same model chain |
| 30 |
25.2346 |
Mesh Belt |
Full Series Mesh Belt Conveyor Models |
Carry PCB board to convey uniformly in furnace, high temperature resistance, anti-deformation |
316L stainless steel material, mesh hole 2×2mm, width 300/400/500mm, max temperature 350℃, service life ≥5000h |
China-made stainless steel mesh belt, high temperature resistant mesh belt, ERSA same model mesh belt, custom mesh belt |
| 31 |
25.2347 |
Sprocket |
Full Series Mesh Belt Transmission System |
Chain transmission meshing, transmit power, ensure uniform operation of mesh belt |
304 stainless steel material, 17/25/30 teeth, compatible with chain pitch 12.7mm, surface quenching treatment |
China-made same specification sprocket, stainless steel sprocket, gear, transmission sprocket |
| 32 |
RE-1030456 |
Conveyor Motor |
Full Series Conveyor System |
Power source for mesh belt transmission, provide stable and uniform conveying power, support speed regulation |
SEW/ABB original motor, power 0.75KW/1.5KW, voltage 380V, variable frequency speed regulation, compatible with original installation position |
China-made same specification geared motor, variable frequency motor, conveyor motor, speed regulating motor |
| 33 |
25.2348 |
Guide Rail |
Full Series Mesh Belt Conveyor Models |
Mesh belt operation guidance, prevent mesh belt deviation and wear, ensure conveying accuracy |
304 stainless steel material, linear/arc guide rail, compatible with mesh belt width, surface polished |
China-made same specification guide rail, stainless steel guide rail, conveyor guide rail, custom guide rail |
| 34 |
25.2349 |
Bearing |
Full Series Transmission Drum, Sprocket |
Support transmission components, reduce wear, ensure smooth operation of transmission system |
High temperature resistant bearing, model 6205/6206, P0 grade accuracy, max temperature 200℃, lubricating grease adapted to high temperature environment |
China-made same specification high temperature resistant bearing, deep groove ball bearing, transmission bearing, SKF/FAG bearing |
| V. Vacuum System Consumables |
|
|
|
|
|
|
| 35 |
28.4163 |
Vacuum Pump Inlet Filter |
Full Series Vacuum Reflow Oven |
Filter at vacuum pump inlet, intercept flux and dust extracted from furnace chamber, protect vacuum pump blades |
Folded glass fiber filter element, max temperature 200℃, compatible with Busch/Edwards/Rietschle vacuum pumps, filtration accuracy 0.3μm |
0532140201/0532140202 vacuum pump filter element, China-made vacuum pump inlet filter element |
| 36 |
28.4164 |
Vacuum Pump Exhaust Filter |
Full Series Vacuum Reflow Oven |
Filter at vacuum pump exhaust, intercept oil mist and residual dust, reduce environmental protection emissions, protect workshop environment |
Oil mist separation filter element, filtration accuracy 0.1μm, compatible with vacuum pump exhaust, max temperature 150℃ |
China-made vacuum pump exhaust filter element, oil mist separator, exhaust filter |
| 37 |
28.4165 |
Vacuum Pump Oil |
Full Series Vacuum Pump |
Lubrication, sealing and cooling of vacuum pump, ensure ultimate vacuum degree of vacuum pump, extend equipment life |
Mineral oil/synthetic oil, model VG46/VG68, compatible with Busch/Edwards vacuum pumps, max temperature 100℃ |
China-made same specification vacuum pump oil, synthetic vacuum pump oil, Busch original vacuum pump oil |
| 38 |
RE-1030647 |
Vacuum Filter Housing |
Vacuum Furnace Gas Path System |
Install and fix filter element in vacuum environment, ensure gas path sealing, adapt to negative pressure working conditions |
304 stainless steel material, welded and formed, max negative pressure -0.1MPa, compatible with 6mm quick-connect fittings, modular design |
China-made same specification vacuum filter housing, stainless steel vacuum filtration module |
| 39 |
28.4166 |
Vacuum Gate Valve |
Vacuum Furnace Gas Path System |
Control on-off of vacuum pipeline, ensure sealing of vacuum environment, adapt to high negative pressure working conditions |
304 stainless steel material, manual/pneumatic control, nominal diameter DN15/DN20, max negative pressure -0.1MPa, max temperature 200℃ |
China-made same specification vacuum gate valve, vacuum ball valve, vacuum butterfly valve, high vacuum valve |
| 40 |
28.4167 |
Vacuum Seal Gasket |
Vacuum Furnace Chamber, Pipeline |
Seal vacuum system, prevent air leakage, ensure ultimate vacuum degree |
Copper/aluminum material, max temperature 200℃, compatible with original flange size, sealing precision 10^-9 Pa·m³/s |
China-made same specification vacuum seal gasket, oxygen-free copper gasket, aluminum gasket, vacuum flange seal |
| VI. Cooling System Consumables |
|
|
|
|
|
|
| 41 |
25.3456 |
Cooling Water Pipe |
Full Series Flux Recovery System, Vacuum Furnace |
Cooling water circuit of condenser and vacuum pump, circulating cooling water, ensure condensation/cooling effect |
304 stainless steel material, outer diameter 6/8/10mm, wall thickness 1mm, max temperature 100℃, water pressure resistance 1MPa |
China-made same specification cooling water pipe, stainless steel water pipe, copper pipe, high pressure resistant water pipe |
| 42 |
25.3457 |
Radiator |
Full Series Cooling System |
Cool cooling water, ensure stable circulating water temperature, adapt to continuous production of reflow oven |
Aluminum fin radiator, heat dissipation area 0.5/1.0/2.0㎡, compatible with cooling water flow 5~20L/min |
China-made same specification radiator, aluminum radiator, water cooling radiator, custom radiator |
| 43 |
RE-1040567 |
Cooling Water Pump |
Full Series Cooling System |
Power for cooling water circulation, ensure stable water circuit flow, adapt to cooling system requirements |
Grundfos/Wilo original water pump, power 0.37KW/0.75KW, flow rate 10~30L/min, head 15~30m |
China-made same specification water pump, circulating water pump, booster pump, stainless steel water pump |
| 44 |
25.3458 |
Temperature Control Valve |
Cooling System Water Temperature |
Automatically adjust cooling water temperature, ensure stable condensation/cooling temperature, adapt to process requirements |
Self-operated temperature control valve, temperature control range 0~100℃, accuracy ±2℃, compatible with DN15/DN20 pipeline |
China-made same specification temperature control valve, self-operated temperature regulating valve, electric temperature control valve |
| 45 |
25.3459 |
Water Filter |
Full Series Cooling System |
Filter cooling water, intercept impurities and scale in water, prevent pipeline blockage, protect water pump |
Stainless steel mesh filter element, filtration accuracy 50μm, compatible with 6/8/10mm pipeline, water pressure resistance 1MPa |
China-made same specification water filter, water filter element, pipeline filter, pre-filter |
| VII. Sensor/Electrical System Consumables |
|
|
|
|
|
|
| 46 |
25.4567 |
Oxygen Sensor |
Full Series Oxygen Analyzer, Vacuum Furnace |
Real-time detection of oxygen concentration in furnace chamber, feedback to control system, realize precise control of oxygen content |
Electrochemical/zirconia sensor, range 0~100%VOL, accuracy ±0.1%, service life ≥20000h |
China-made same specification oxygen sensor, zirconia sensor, electrochemical oxygen sensor, SIGMA original sensor |
| 47 |
25.4568 |
Proximity Switch |
Full Series Conveyor System, Oven Door |
Position detection and limit control, mesh belt in-place, oven door switch detection, signal feedback |
Schneider/Omron original proximity switch, detection distance 10mm, NPN/PNP output, voltage 24V DC |
China-made same specification proximity switch, photoelectric switch, limit switch, sensor |
| 48 |
25.4569 |
Photoelectric Sensor |
Full Series PCB Detection, Conveyor System |
PCB board presence detection, counting and positioning, adapt to reflow oven board in/out detection |
Diffuse reflection/through-beam photoelectric sensor, detection distance 0~500mm, voltage 24V DC, NPN/PNP output |
China-made same specification photoelectric sensor, photoelectric switch, diffuse reflection sensor, through-beam sensor |
| 49 |
RE-1050678 |
Inverter |
Full Series Conveyor, Fan System |
Motor speed regulation, realize precise control of mesh belt speed and fan air volume, energy saving and consumption reduction |
Schneider/Delta original inverter, power 0.75KW/1.5KW/2.2KW, voltage 380V, compatible with original motor |
China-made same specification inverter, variable frequency drive, motor inverter, fan inverter |
| 50 |
25.4570 |
PLC Controller |
Full Series Equipment Control System |
Core logic control of equipment, temperature zone control, conveyor control, fault alarm, data recording |
Delta/Keyence series PLC, compatible with Rehm original program, support multi-module expansion |
China-made same specification PLC controller, programmable logic controller, industrial PLC |
| VIII. Sealing System Full Range Consumables |
|
|
|
|
|
|
| 51 |
27.2009 |
O-Ring Seal Gasket |
Full Series Filters, Fittings, Valves |
Seal gas path, water path and vacuum system, prevent air leakage, liquid leakage and oil leakage |
Nitrile rubber/fluororubber material, temperature range -30℃~200℃, size compatible with adapted model, resistant to organic solvent corrosion |
Same specification solvent-resistant O-ring, seal gasket, fluororubber O-ring, nitrile rubber O-ring |
| 52 |
27.2010 |
Shaft Seal |
Full Series Motors, Pumps, Transmission Drums |
Rotating shaft seal, prevent lubricating oil leakage and external impurities from entering, protect bearings |
Mechanical seal/skeleton oil seal, material nitrile rubber/fluororubber, compatible with shaft diameter 12/15/20mm, max temperature 180℃ |
China-made same specification shaft seal, mechanical seal, skeleton oil seal, rotary seal |
| 53 |
27.2011 |
Flange Seal Gasket |
Full Series Pipelines, Valves, Cavities |
Flange connection seal, ensure sealing performance of pipelines and cavities, prevent leakage |
Asbestos/non-asbestos/metal wound gasket, max temperature 300℃, water pressure resistance 2MPa, compatible with DN15/DN20/DN25 flanges |
China-made same specification flange gasket, seal gasket, metal wound gasket, non-asbestos gasket |
| 54 |
27.2012 |
Door Seal Strip |
Full Series Reflow Oven Door |
Seal when oven door is closed, prevent flue gas leakage and heat loss, ensure stable temperature zone in furnace chamber |
Silicone + glass fiber material, temperature range -40℃~300℃, size 20×15mm, self-adhesive design, compatible with original oven door size |
27.2012 China-made replacement, oven door seal strip, high temperature resistant seal strip, silicone seal strip |
| IX. Cleaning/Maintenance Consumables |
|
|
|
|
|
|
| 55 |
25.6656 |
Filter Cleaning Tool Kit |
Full Series Flux Filters |
Special tool for filter disassembly and cleaning, including scraper, brush, pry bar, compatible with original filter size |
Stainless steel + nylon material, 4-piece tool set, compatible with all Rehm models, high temperature resistant design |
China-made same specification cleaning tool set, filter scraper, cleaning brush, disassembly tool |
| 56 |
25.6657 |
Nozzle Cleaning Pin |
Full Series Flux Recovery System, Cooling System |
Clean nozzle and pipeline blockage, dredge flux nozzle and cooling water nozzle, ensure stable flow |
Stainless steel material, diameter 0.5/0.8/1.0mm, length 100mm, compatible with original nozzle aperture |
China-made same specification cleaning pin, through pin, nozzle dredging pin, stainless steel cleaning pin |
| 57 |
25.6658 |
High-Temperature Lubricating Grease |
Full Series Transmission System, Bearings |
High temperature lubrication of chains, sprockets, bearings and guide rails, reduce wear and extend component life |
Synthetic high temperature lubricating grease, temperature range -40℃~300℃, dropping point 350℃, adapted to high temperature working conditions |
China-made same specification high temperature lubricating grease, high temperature resistant butter, chain lubricating grease, bearing lubricating grease |
| 58 |
RE-1060789 |
Maintenance Kit |
VXS/VXP/K Series Full Models |
Complete set of consumables for annual equipment maintenance, including filter, filter element, seal strip, lubricating grease, cleaning tool |
Original supporting maintenance kit, compatible with corresponding model, complete set of wearing parts, support customized combination |
China-made same specification maintenance kit, customized maintenance set, equipment maintenance package, wearing parts set |
| 59 |
25.6659 |
Flux Residue Cleaner |
Full Series Furnace Chamber, Filters, Pipelines |
Clean flux residue inside furnace chamber, filter and pipeline, quickly dissolve rosin residue |
Environmental friendly cleaner, halogen-free, fast drying without residue, adapted to high temperature working conditions, no damage to equipment materials |
China-made same specification flux cleaner, environmental friendly cleaner, rosin cleaner, furnace chamber cleaner |
| 60 |
25.6660 |
Anti-Static Cleaning Cloth |
Full Series Equipment Maintenance |
Clean equipment surface, PCB board and furnace chamber interior, anti-static, no lint, adapted to electronic manufacturing scenarios |
Microfiber material, anti-static level 10^6~10^9Ω, no lint, strong water absorption, reusable |
China-made same specification anti-static cleaning cloth, dust-free cloth, microfiber cleaning cloth, anti-static rag |
Your message must be between 20-3,000 characters!
english
français
Deutsch
Italiano
Русский
Español
português
Nederlandse
ελληνικά
日本語
한국
العربية
Türkçe
indonesia
tiếng Việt
ไทย
polski
Overall Rating
Rating Snapshot
The following is the distribution of all ratingsAll Reviews